This section covers how to use inc, show, scan, next, prev, rmm, rmf, and msgchk. One of the best things about MH is the consistent interface between programs. One thing to keep in mind when using these commands is how to specify message lists. In the case of inc this does not really make any sense but with commands like show it is useful to know.
A message list can consist of something like 23 20
16 which will act on messages 23, 20 and 16. This is fairly simple but you can do
more useful things like 23-30 which will act on all the
messages between 23 and 30. You can also specify something like cur:10 which will act on the current message and the next 9
messages. The cur, last,
and first messages are special messages that refer to the
current, last or first message in the folder.
If you just type in inc and hit return you will be well on your way to getting started with MH. The first time you run inc it will set up your account to use all the MH defaults and ask you about creating a Mail directory under your HOME directory. If you have mail waiting to be downloaded you will see something that looks like:
29 01/15 Doug White Re: Another Failed to boot problem<<On Mon, 15 J 30 01/16 "Jordan K. Hubbar Re: FBSD 2.1<<> Do you want a library instead of 31 01/16 Bruce Evans Re: location of bad144 table<<>> >It would appea 32 01/16 "Jordan K. Hubbar Re: video is up<<> Anyway, mrouted won't run, ev 33 01/16 Michael Smith Re: FBSD 2.1<<Nate Williams stands accused of sa
This is the same thing you will see from a scan (see Section 2.3). If you just run inc with no arguments it will look on your computer for email that is supposed to be coming to you.
A lot of people like to use POP for grabbing their email. MH can do POP to grab your email. You will need to give inc a few command line arguments.
That tells inc to go to mail.pop.org to download your email, and that your username
on their system is username. The -norpop option tells inc to use plain
POP3 for downloading your email. MH has support for a few
different dialects of POP. More than likely you will never ever need to use
them though. While you can do more complex things with inc
such as audit files and scan format files this will get you going.
The msgchk command is used to get information on whether
or not you have new email. msgchk takes the same -host and -user options that inc takes.
show is to show a letter in your current folder. Like inc, show is a fairly straightforward command. If you just type show and hit return then it displays the current message. You can also give specific message numbers to show:
This would display message numbers 32, 45 and 56 right after each other. Unless you change the default behavior show basically just does a more on the email message.
next is used to move onto the next message and prev will go to the previous message. Both commands have an implied show command so that when you go to the next message it automatically displays it.
scan will display a brief listing of the messages in your current folder. This is an example of what the scan command will give you.
30+ 01/16 Jordan K. Hubbar Re: FBSD 2.1<<> Do you want a library instead of 31 01/16 Bruce Evans Re: location of bad144 table<<>> >It would appea 32 01/16 Jordan K. Hubbar Re: video is up<<> Anyway, mrouted won't run, ev 33 01/16 Michael Smith Re: FBSD 2.1<<Nate Williams stands accused of sa
Like just about everything in MH this display is very configurable. This is the typical default display. It gives you the message number, the date on the email, the sender, the subject line, and a sentence fragment from the very beginning of the email if it can fit it. The + means that message is the current message, so if you do a show it will display that message.
One useful option for scan is the -reverse option.
This will list your messages with the highest message number first and lowest
message number last. Another useful option with scan is to
have it read from a file. If you want to scan your incoming mailbox on FreeBSD
without having to inc it you can do scan -file /var/mail/username. This can be used with any file that
is in the mbox format.
rmm is used to remove a mail message. The default is typically to not actually remove the message but to rename the file to one that is ignored by the MH commands. You will periodically need to go through and physically delete the “removed” messages.
The rmf command is used to remove folders. This does not just rename the files but actually removes the from the hard drive so you should be careful when you use this command.
The first thing that you will want to do is inc your new mail. So at a shell prompt just type in inc and hit return.
% inc Incorporating new mail into inbox... 36+ 01/19 Stephen L. Lange Request...<<Please remove me as contact for pind 37 01/19 Matt Thomas Re: kern/950: Two PCI bridge chips fail (multipl 38 01/19 Amancio Hasty Jr Re: FreeBSD and VAT<<>>> Bill Fenner said: > In %
This shows you the new email that has been added to your mailbox. So the next thing to do is show the email and move around.
% show
Received: by sashimi.wwa.com (Smail3.1.29.1 #2)
id m0tdMZ2-001W2UC; Fri, 19 Jan 96 13:33 CST
Date: Fri, 19 Jan 1996 13:33:31 -0600 (CST)
From: "Stephen L. Lange" <stvlange@wwa.com>
To: matt@garply.com
Subject: Request...
Message-Id: <Pine.BSD.3.91.960119133211.824A-100000@sashimi.wwa.com>
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Please remove me as contact for pindat.com
% rmm
% next
Received: from localhost (localhost [127.0.0.1]) by whydos.lkg.dec.com (8.6.11/8
.6.9) with SMTP id RAA24416; Fri, 19 Jan 1996 17:56:48 GMT
Message-Id: <199601191756.RAA24416@whydos.lkg.dec.com>
X-Authentication-Warning: whydos.lkg.dec.com: Host localhost didn't use HELO pro
tocol
To: hsu@clinet.fi
Cc: hackers@FreeBSD.org
Subject: Re: kern/950: Two PCI bridge chips fail (multiple multiport ethernet
boards)
In-Reply-To: Your message of "Fri, 19 Jan 1996 00:18:36 +0100."
<199601182318.AA11772@Sysiphos>
X-Mailer: exmh version 1.5omega 10/6/94
Date: Fri, 19 Jan 1996 17:56:40 +0000
From: Matt Thomas <matt@lkg.dec.com>
Sender: owner-hackers@FreeBSD.org
Precedence: bulk
This is due to a typo in pcireg.h (to
which I am probably the guilty party).
The rmm removed the current message and the next command moved me on to the next message. Now if I wanted to look at ten most recent messages so I could read one of them here is what I would do:
% scan last:10 26 01/16 maddy Re: Testing some stuff<<yeah, well, Trinity has 27 01/17 Automatic digest NET-HAPPENINGS Digest - 16 Jan 1996 to 17 Jan 19 28 01/17 Evans A Criswell Re: Hey dude<<>From matt@tempest.garply.com Tue 29 01/16 Karl Heuer need configure/make volunteers<<The FSF is looki 30 01/18 Paul Stephanouk Re: [alt.religion.scientology] Raw Meat (humor)< 31 01/18 Bill Lenherr Re: Linux NIS Solaris<<--- On Thu, 18 Jan 1996 1 34 01/19 John Fieber Re: Stuff for the email section?<<On Fri, 19 Jan 35 01/19 support@foo.garpl [garply.com #1138] parlor<<Hello. This is the Ne 37+ 01/19 Matt Thomas Re: kern/950: Two PCI bridge chips fail (multipl 38 01/19 Amancio Hasty Jr Re: FreeBSD and VAT<<>>> Bill Fenner said: > In %
Then if I wanted to read message number 27 I would do a show 27 and it would be displayed. As you can probably tell from this sample session MH is pretty easy to use and looking through emails and displaying them is fairly intuitive and easy.