v1.0, 16 January 1996
FreeBSD is a registered trademark of the FreeBSD Foundation.
Motif, OSF/1, and UNIX are registered trademarks and IT DialTone and The Open Group are trademarks of The Open Group in the United States and other countries.
Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks. Where those designations appear in this document, and the FreeBSD Project was aware of the trademark claim, the designations have been followed by the “™” or the “®” symbol.
MH started back in 1977 at the RAND Corporation, where the initial philosophies behind MH were developed. MH is not so much a monolithic email program but a philosophy about how best to develop tools for reading email. The MH developers have done a great job adhering to the KISS principle: Keep It Simple Stupid. Rather than have one large program for reading, sending and handling email they have written specialized programs for each part of your email life. One might liken MH to the specialization that one finds in insects and nature. Each tool in MH does one thing, and does it very well.
Beyond just the various tools that one uses to handle their email MH has done an excellent job keeping the configuration of each of
these tools consistent and uniform. In fact, if you are not quite sure how something is
supposed to work or what the arguments for some command are supposed to be, then you can
generally guess and be right. Each MH command is consistent
about how it handles reading the configuration files and how it takes arguments on the
command line. One useful thing to remember is that you can always add a -help to the command to have it display the options for that
command.
The first thing that you need to do is to make sure that you have installed the MH package on your FreeBSD machine. If you installed from CDROM you should be able to execute the following to load MH:
You will notice that it created a /usr/local/lib/mh directory for you as well as adding several binaries to the /usr/local/bin directory. If you would prefer to compile it yourself then you can anonymous ftp it from ftp.ics.uci.edu or louie.udel.edu.This primer is not a full comprehensive explanation of how MH works. This is just intended to get you started on the road to happier, faster mail reading. You should read the manual pages for the various commands. You might also want to read the comp.mail.mh newsgroup. Also you can read the FAQ for MH. The best resource for MH is Jerry Peek's MH & nmh: Email for Users & Programmers.
This section covers how to use inc, show, scan, next, prev, rmm, rmf, and msgchk. One of the best things about MH is the consistent interface between programs. One thing to keep in mind when using these commands is how to specify message lists. In the case of inc this does not really make any sense but with commands like show it is useful to know.
A message list can consist of something like 23 20
16 which will act on messages 23, 20 and 16. This is fairly simple but you can do
more useful things like 23-30 which will act on all the
messages between 23 and 30. You can also specify something like cur:10 which will act on the current message and the next 9
messages. The cur, last,
and first messages are special messages that refer to the
current, last or first message in the folder.
If you just type in inc and hit return you will be well on your way to getting started with MH. The first time you run inc it will set up your account to use all the MH defaults and ask you about creating a Mail directory under your HOME directory. If you have mail waiting to be downloaded you will see something that looks like:
29 01/15 Doug White Re: Another Failed to boot problem<<On Mon, 15 J 30 01/16 "Jordan K. Hubbar Re: FBSD 2.1<<> Do you want a library instead of 31 01/16 Bruce Evans Re: location of bad144 table<<>> >It would appea 32 01/16 "Jordan K. Hubbar Re: video is up<<> Anyway, mrouted won't run, ev 33 01/16 Michael Smith Re: FBSD 2.1<<Nate Williams stands accused of sa
This is the same thing you will see from a scan (see Section 2.3). If you just run inc with no arguments it will look on your computer for email that is supposed to be coming to you.
A lot of people like to use POP for grabbing their email. MH can do POP to grab your email. You will need to give inc a few command line arguments.
That tells inc to go to mail.pop.org to download your email, and that your username
on their system is username. The -norpop option tells inc to use plain
POP3 for downloading your email. MH has support for a few
different dialects of POP. More than likely you will never ever need to use
them though. While you can do more complex things with inc
such as audit files and scan format files this will get you going.
The msgchk command is used to get information on whether
or not you have new email. msgchk takes the same -host and -user options that inc takes.
show is to show a letter in your current folder. Like inc, show is a fairly straightforward command. If you just type show and hit return then it displays the current message. You can also give specific message numbers to show:
This would display message numbers 32, 45 and 56 right after each other. Unless you change the default behavior show basically just does a more on the email message.
next is used to move onto the next message and prev will go to the previous message. Both commands have an implied show command so that when you go to the next message it automatically displays it.
scan will display a brief listing of the messages in your current folder. This is an example of what the scan command will give you.
30+ 01/16 Jordan K. Hubbar Re: FBSD 2.1<<> Do you want a library instead of 31 01/16 Bruce Evans Re: location of bad144 table<<>> >It would appea 32 01/16 Jordan K. Hubbar Re: video is up<<> Anyway, mrouted won't run, ev 33 01/16 Michael Smith Re: FBSD 2.1<<Nate Williams stands accused of sa
Like just about everything in MH this display is very configurable. This is the typical default display. It gives you the message number, the date on the email, the sender, the subject line, and a sentence fragment from the very beginning of the email if it can fit it. The + means that message is the current message, so if you do a show it will display that message.
One useful option for scan is the -reverse option.
This will list your messages with the highest message number first and lowest
message number last. Another useful option with scan is to
have it read from a file. If you want to scan your incoming mailbox on FreeBSD
without having to inc it you can do scan -file /var/mail/username. This can be used with any file that
is in the mbox format.
rmm is used to remove a mail message. The default is typically to not actually remove the message but to rename the file to one that is ignored by the MH commands. You will periodically need to go through and physically delete the “removed” messages.
The rmf command is used to remove folders. This does not just rename the files but actually removes the from the hard drive so you should be careful when you use this command.
The first thing that you will want to do is inc your new mail. So at a shell prompt just type in inc and hit return.
% inc Incorporating new mail into inbox... 36+ 01/19 Stephen L. Lange Request...<<Please remove me as contact for pind 37 01/19 Matt Thomas Re: kern/950: Two PCI bridge chips fail (multipl 38 01/19 Amancio Hasty Jr Re: FreeBSD and VAT<<>>> Bill Fenner said: > In %
This shows you the new email that has been added to your mailbox. So the next thing to do is show the email and move around.
% show
Received: by sashimi.wwa.com (Smail3.1.29.1 #2)
id m0tdMZ2-001W2UC; Fri, 19 Jan 96 13:33 CST
Date: Fri, 19 Jan 1996 13:33:31 -0600 (CST)
From: "Stephen L. Lange" <stvlange@wwa.com>
To: matt@garply.com
Subject: Request...
Message-Id: <Pine.BSD.3.91.960119133211.824A-100000@sashimi.wwa.com>
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Please remove me as contact for pindat.com
% rmm
% next
Received: from localhost (localhost [127.0.0.1]) by whydos.lkg.dec.com (8.6.11/8
.6.9) with SMTP id RAA24416; Fri, 19 Jan 1996 17:56:48 GMT
Message-Id: <199601191756.RAA24416@whydos.lkg.dec.com>
X-Authentication-Warning: whydos.lkg.dec.com: Host localhost didn't use HELO pro
tocol
To: hsu@clinet.fi
Cc: hackers@FreeBSD.org
Subject: Re: kern/950: Two PCI bridge chips fail (multiple multiport ethernet
boards)
In-Reply-To: Your message of "Fri, 19 Jan 1996 00:18:36 +0100."
<199601182318.AA11772@Sysiphos>
X-Mailer: exmh version 1.5omega 10/6/94
Date: Fri, 19 Jan 1996 17:56:40 +0000
From: Matt Thomas <matt@lkg.dec.com>
Sender: owner-hackers@FreeBSD.org
Precedence: bulk
This is due to a typo in pcireg.h (to
which I am probably the guilty party).
The rmm removed the current message and the next command moved me on to the next message. Now if I wanted to look at ten most recent messages so I could read one of them here is what I would do:
% scan last:10 26 01/16 maddy Re: Testing some stuff<<yeah, well, Trinity has 27 01/17 Automatic digest NET-HAPPENINGS Digest - 16 Jan 1996 to 17 Jan 19 28 01/17 Evans A Criswell Re: Hey dude<<>From matt@tempest.garply.com Tue 29 01/16 Karl Heuer need configure/make volunteers<<The FSF is looki 30 01/18 Paul Stephanouk Re: [alt.religion.scientology] Raw Meat (humor)< 31 01/18 Bill Lenherr Re: Linux NIS Solaris<<--- On Thu, 18 Jan 1996 1 34 01/19 John Fieber Re: Stuff for the email section?<<On Fri, 19 Jan 35 01/19 support@foo.garpl [garply.com #1138] parlor<<Hello. This is the Ne 37+ 01/19 Matt Thomas Re: kern/950: Two PCI bridge chips fail (multipl 38 01/19 Amancio Hasty Jr Re: FreeBSD and VAT<<>>> Bill Fenner said: > In %
Then if I wanted to read message number 27 I would do a show 27 and it would be displayed. As you can probably tell from this sample session MH is pretty easy to use and looking through emails and displaying them is fairly intuitive and easy.
Anybody who gets lots of email definitely wants to be able to prioritize, stamp, brief, de-brief, and number their emails in a variety of different ways. MH can do this better than just about anything. One thing that we have not really talked about is the concept of folders. You have undoubtedly come across the folders concept using other email programs. MH has folders too. MH can even do sub-folders of a folder. One thing you should keep in mind with MH is that when you ran inc for the first time and it asked you if it could create a Mail directory it began storing everything in that directory. If you look at that directory you will find a directory named inbox. The inbox directory houses all of your incoming mail that has not been thrown anywhere else.
Whenever you create a new folder a new directory is going to be created underneath your MH Mail directory, and messages in that folder are going to be stored in that directory. When a new email message comes, it is thrown into your inbox directory with a file name that is equivalent to the message number. So even if you did not have any of the MH tools to read your email you could still use standard UNIX® commands to munge around in those directories and just more your files. It is this simplicity that really gives you a lot of power with what you can do with your email.
Just as you can use message lists like 23 16 42
with most MH commands there is a folder option you can specify
with just about every MH command. If you do a scan +freebsd it will scan your freebsd
folder, and your current folder will be changed to freebsd. If
you do a show +freebsd 23 16 42, show
is going to switch to your freebsd folder and display messages
23, 16 and 42. So remember that +folder syntax. You will need to make sure you use
it to make commands process different folders. Remember you default folder for mail is
inbox so doing a folder +inbox
should always get you back to your mail. Of course, in MH's
infinite flexibility this can be changed but most places have probably left it as inbox.
pick is one of the more complex commands in the MH system. So you might want to read the pick(1) man page for a more thorough understanding. At its simplest level you can do something like
This will tell pick to look through every single line in every message in your current folder and tell you which message numbers it found the word pci in. You can then show those messages and read them if you wish or rmm them. You would have to specify something like show 15 42 55-57 to display them though. A slightly more useful thing to do is this:
This will show you the same messages you just did not have to work as hard to do
it. The -seq option is really an abbreviation of -sequence and pick is just a sequence
which contains the message numbers that matched. You can use sequences with just
about any MH command. So you could have done an rmm pick and all those messages would be removed instead. You
sequence can be named anything. If you run pick again it will overwrite the old
sequence if you use the same name.
Doing a pick -search can be a bit more time consuming than just searching for message from someone, or to someone. So pick allows you to use the following predefined search criteria:
-tosearch based upon who the message is to
-ccsearch based on who is in the Cc: list
-fromsearch for who sent the message
-subjectsearch for emails with this subject
-datefind emails with a matching date
--componentsearch for any other component in the header. (i.e. --reply-to to find all emails with a certain reply-to in the
header)
This allows you to do things like
to get a list of all the email send to the FreeBSD hackers mailing list. pick also allows you to group these criteria in different ways using the following options:… -and …
… -or …
-not …
-lbrace … -rbrace
These commands allow you to do things like
That will grab all the email in your inbox that was sent to freebsd-hackers or cc'd to that list. The brace options allow you to group search criteria together. This is sometimes very necessary as in the following example
Basically this says “pick (to freebsd-hackers and not cc'd on freebsd-questions) and the subject is pci”. It should look through your folder and find all messages sent to the freebsd-hackers list that are not cc'd to the freebsd-questions list and contain “pci” in the subject line. Ordinarily you might have to worry about something called operator precedence. Remember in math how you evaluate from left to right and you do multiplication and division first and addition and subtraction second? MH has the same type of rules for pick. It is fairly complex so you might want to study the manual page. This document is just to help you get acquainted with MH.
There are three programs which are primarily just for manipulating your folders. The folder program is used to switch between folders, pack them, and list them. At its simplest level you can do a folder +newfolder and you will be switched into newfolder. From there on out all your MH commands like comp, repl, scan, and show will act on that newfolder folder.
Sometimes when you are reading and deleting messages you will develop “holes” in your folders. If you do a scan you might just see messages 34, 35, 36, 43, 55, 56, 57, 80. If you do a folder -pack this will renumber all your messages so that there are no holes. It does not actually delete any messages though. So you may need to periodically go through and physically delete rmm'd messages.
If you need statistics on your folders you can do a folders or folder -all to list all your folders, how many messages they have, what the current message is in each one and so on. This line of stats it displays for all your folders is the same one you get when you change to a folder with folder +foldername. A folders command looks like this:
Folder # of messages ( range ); cur msg (other files)
announce has 1 message ( 1- 1).
drafts has no messages.
f-hackers has 43 messages ( 1- 43).
f-questions has 16 messages ( 1- 16).
inbox+ has 35 messages ( 1- 38); cur= 37.
lists has 8 messages ( 1- 8).
netfuture has 1 message ( 1- 1).
out has 31 messages ( 1- 31).
personal has 6 messages ( 1- 6).
todo has 58 messages ( 1- 58); cur= 1.
TOTAL= 199 messages in 13 folders.
The refile command is what you use to move messages between folders. When you do something like refile 23 +netfuture message number 23 is moved into the netfuture folder. You could also do something like refile 23 +netfuture/latest which would put message number 23 in a subfolder called latest under the netfuture folder. If you want to keep a message in the current folder and link it you can do a refile -link 23 +netfuture which would keep 23 in your current inbox but also list in your netfuture folder. You are probably beginning to realize some of the really powerful things you can do with MH.
Email is a two way street for most people so you want to be able to send something back. The way MH handles sending mail can be a bit difficult to follow at first, but it allows for incredible flexibility. The first thing MH does is to copy a components file into your outgoing email. A components file is basically a skeleton email letter with stuff like the To: and Subject: headers already in it. You are then sent into your editor where you fill in the header information and then type the body of your message below the dashed lines in the message. When you leave the editor, the whatnow program is run. When you are at the What now? prompt you can tell it to send, list, edit, push, and quit. Most of these commands are self-explanatory. So the message sending process involves copying a component file, editing your email, and then telling the whatnow program what to do with your email.
The comp program has a few useful command line options.
The most important one to know right now is the -editor
option. When MH is installed the default editor is
usually a program called prompter which comes with MH. It is not a very exciting editor and basically just gets
the job done. So when you go to compose a message to someone you might want to use
comp -editor /usr/bin/vi or comp
-editor /usr/local/bin/pico instead. Once you have run comp you are in your editor and you see
something that looks like this:
You need to put the person you are sending the mail to after the To: line. It works the same way for the other headers also, so you would need to put your subject after the Subject: line. Then you would just put the body of your message after the dashed lines. It may seem a bit simplistic since a lot of email programs have special requesters that ask you for this information but there really is no point to that. Plus this really gives you excellent flexibility.
To:freebsd-rave@FreeBSD.org cc: Subject:And on the 8th day God created the FreeBSD core team -------- Wow this is an amazing operating system. Thanks!
You can now save this message and exit your editor. You will see the What now? prompt and you can type in send or s and hit return. Then the FreeBSD core team will receive their just rewards. As I mentioned earlier, you can also use other commands at the What now? prompt. For example you can use quit, if you do not want to send the message.
The forw command is stunningly similar. The big difference being that the message you are forwarding is automatically included in the outgoing message. When you run forw it will forward your current message. You can always tell it to forward something else by doing something like forw 23 and then message number 23 will be put in your outgoing message instead of the current message. Beyond those small differences forw functions exactly the same as comp. You go through the exact same message sending process.
The repl command will reply to the current message,
unless you give it a different message to reply to. repl
will do its best to go ahead and fill in some of the email headers already. So you
will notice that the To: header already has the
address of the recipient in there. Also the Subject:
line will already be filled in. You then go about the normal message composition
process and you are done. One useful command line option to know here is the
-cc option. You can use all, to, cc, me after the -cc option to have repl automatically
add the various addresses to the Cc: list in the message.
You have probably noticed that the original message is not included. This is
because most MH setups are configured to do this
from the start.
The components file is usually in /usr/local/lib/mh. You can copy that file into your MH Mail directory and edit to contain what you want it to contain. It is a fairly basic file. You have various email headers at the top, a dashed line and then nothing. The comp command just copies this components file and then edits it. You can add any kind of valid RFC822 header you want. For instance you could have something like this in your components file:
MH would then copy this components file and throw you into your editor. The components file is fairly simple. If you wanted to have a signature on those messages you would just put your signature in that components file.
The replcomps file is a bit more complex. The default replcomps looks like this:
%(lit)%(formataddr %<{reply-to}%?{from}%?{sender}%?{return-path}%>)\
%<(nonnull)%(void(width))%(putaddr To: )\n%>\
%(lit)%(formataddr{to})%(formataddr{cc})%(formataddr(me))\
%<(nonnull)%(void(width))%(putaddr cc: )\n%>\
%<{fcc}Fcc: %{fcc}\n%>\
%<{subject}Subject: Re: %{subject}\n%>\
%<{date}In-reply-to: Your message of "\
%<(nodate{date})%{date}%|%(pretty{date})%>."%<{message-id}
%{message-id}%>\n%>\
--------
It is in the same basic format as the components file but it contains quite a few extra formatting codes. The %(lit) command makes room for the address. The %(formataddr) is a function that returns a proper email address. The next part is %< which means if and the {reply-to} means the reply-to field in the original message. So that might be translated this way:
%<if {reply-to} the original message has a reply-to then give that to formataddr, %? else {from} take the from address, %? else {sender} take the sender address, %? else {return-path} take the return-path from the original message, %> endif.
As you can tell MH formatting can get rather involved. You can probably decipher what most of the other functions and variables mean. All of the information on writing these format strings is in the MH-Format manual page. The really nice thing is that once you have built your customized replcomps file you will not need to touch it again. No other email program really gives you the power and flexibility that MH gives you.