20.7. Object Naming

As described above, Vinum assigns default names to plexes and subdisks, although they may be overridden. Overriding the default names is not recommended: experience with the VERITAS volume manager, which allows arbitrary naming of objects, has shown that this flexibility does not bring a significant advantage, and it can cause confusion.

Names may contain any non-blank character, but it is recommended to restrict them to letters, digits and the underscore characters. The names of volumes, plexes and subdisks may be up to 64 characters long, and the names of drives may be up to 32 characters long.

Vinum objects are assigned device nodes in the hierarchy /dev/vinum. The configuration shown above would cause Vinum to create the following device nodes:

• The control devices /dev/vinum/control and /dev/vinum/controld, which are used by vinum(8) and the Vinum daemon respectively.

• Block and character device entries for each volume. These are the main devices used by Vinum. The block device names are the name of the volume, while the character device names follow the BSD tradition of prepending the letter r to the name. Thus the configuration above would include the block devices /dev/vinum/myvol, /dev/vinum/mirror, /dev/vinum/striped, /dev/vinum/raid5 and /dev/vinum/raid10, and the character devices /dev/vinum/rmyvol, /dev/vinum/rmirror, /dev/vinum/rstriped, /dev/vinum/rraid5 and /dev/vinum/rraid10. There is obviously a problem here: it is possible to have two volumes called r and rr, but there will be a conflict creating the device node /dev/vinum/rr: is it a character device for volume r or a block device for volume rr? Currently Vinum does not address this conflict: the first-defined volume will get the name.

• A directory /dev/vinum/drive with entries for each drive. These entries are in fact symbolic links to the corresponding disk nodes.

• A directory /dev/vinum/volume with entries for each volume. It contains subdirectories for each plex, which in turn contain subdirectories for their component subdisks.

• The directories /dev/vinum/plex, /dev/vinum/sd, and /dev/vinum/rsd, which contain block device nodes for each plex and block and character device nodes respectively for each subdisk.

For example, consider the following configuration file:

	drive drive1 device /dev/sd1h
	drive drive2 device /dev/sd2h
	drive drive3 device /dev/sd3h
	drive drive4 device /dev/sd4h
    volume s64 setupstate
      plex org striped 64k
        sd length 100m drive drive1
        sd length 100m drive drive2
        sd length 100m drive drive3
        sd length 100m drive drive4

After processing this file, vinum(8) creates the following structure in /dev/vinum:

	brwx------  1 root  wheel   25, 0x40000001 Apr 13 16:46 Control
	brwx------  1 root  wheel   25, 0x40000002 Apr 13 16:46 control
	brwx------  1 root  wheel   25, 0x40000000 Apr 13 16:46 controld
	drwxr-xr-x  2 root  wheel       512 Apr 13 16:46 drive
	drwxr-xr-x  2 root  wheel       512 Apr 13 16:46 plex
	crwxr-xr--  1 root  wheel   91,   2 Apr 13 16:46 rs64
	drwxr-xr-x  2 root  wheel       512 Apr 13 16:46 rsd
	drwxr-xr-x  2 root  wheel       512 Apr 13 16:46 rvol
	brwxr-xr--  1 root  wheel   25,   2 Apr 13 16:46 s64
	drwxr-xr-x  2 root  wheel       512 Apr 13 16:46 sd
	drwxr-xr-x  3 root  wheel       512 Apr 13 16:46 vol

	/dev/vinum/drive:
    total 0
    lrwxr-xr-x  1 root  wheel  9 Apr 13 16:46 drive1 -> /dev/sd1h
    lrwxr-xr-x  1 root  wheel  9 Apr 13 16:46 drive2 -> /dev/sd2h
    lrwxr-xr-x  1 root  wheel  9 Apr 13 16:46 drive3 -> /dev/sd3h
    lrwxr-xr-x  1 root  wheel  9 Apr 13 16:46 drive4 -> /dev/sd4h

    /dev/vinum/plex:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x10000002 Apr 13 16:46 s64.p0

    /dev/vinum/rsd:
    total 0
    crwxr-xr--  1 root  wheel   91, 0x20000002 Apr 13 16:46 s64.p0.s0
    crwxr-xr--  1 root  wheel   91, 0x20100002 Apr 13 16:46 s64.p0.s1
    crwxr-xr--  1 root  wheel   91, 0x20200002 Apr 13 16:46 s64.p0.s2
    crwxr-xr--  1 root  wheel   91, 0x20300002 Apr 13 16:46 s64.p0.s3

    /dev/vinum/rvol:
    total 0
    crwxr-xr--  1 root  wheel   91,   2 Apr 13 16:46 s64

    /dev/vinum/sd:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x20000002 Apr 13 16:46 s64.p0.s0
    brwxr-xr--  1 root  wheel   25, 0x20100002 Apr 13 16:46 s64.p0.s1
    brwxr-xr--  1 root  wheel   25, 0x20200002 Apr 13 16:46 s64.p0.s2
    brwxr-xr--  1 root  wheel   25, 0x20300002 Apr 13 16:46 s64.p0.s3

    /dev/vinum/vol:
    total 1
    brwxr-xr--  1 root  wheel   25,   2 Apr 13 16:46 s64
    drwxr-xr-x  3 root  wheel       512 Apr 13 16:46 s64.plex

    /dev/vinum/vol/s64.plex:
    total 1
    brwxr-xr--  1 root  wheel   25, 0x10000002 Apr 13 16:46 s64.p0
    drwxr-xr-x  2 root  wheel       512 Apr 13 16:46 s64.p0.sd

    /dev/vinum/vol/s64.plex/s64.p0.sd:
    total 0
    brwxr-xr--  1 root  wheel   25, 0x20000002 Apr 13 16:46 s64.p0.s0
    brwxr-xr--  1 root  wheel   25, 0x20100002 Apr 13 16:46 s64.p0.s1
    brwxr-xr--  1 root  wheel   25, 0x20200002 Apr 13 16:46 s64.p0.s2
    brwxr-xr--  1 root  wheel   25, 0x20300002 Apr 13 16:46 s64.p0.s3

Although it is recommended that plexes and subdisks should not be allocated specific names, Vinum drives must be named. This makes it possible to move a drive to a different location and still recognize it automatically. Drive names may be up to 32 characters long.

# newfs /dev/vinum/concat
newfs: /dev/vinum/concat: can't figure out file system partition

# newfs -v /dev/vinum/concat